DSO-TC3 Digital Oscilloscope Transistor Tester 10MS/s Sampling Rate 500kHz Bandwidth Support Diode LCR Detect Signal Generator
[Write a Review]
Reviews: 0 Enquiries: 0
Reviews: 0 Enquiries: 0
Color:
1. Select Options Above.
2. Copy Following Text To Message When Buynow On Trademe.
2. Copy Following Text To Message When Buynow On Trademe.
<< Copy This
Note: All clothing sizings are for reference only. Feel free to choose. In case it doesn't fit, we can exchange it for you. You just need to send it back to our NZ office, then we send a new one to you for free.
-
Specifics
- IS Battery Demountable: No
- Display resolution: 320*240 Pixels
- Display Size: 2.9 Inches & Under
- Band Width: 500-699MHz
- DIY Supplies: ELECTRICAL
- FNIRSI Model: DSO-TC3
- Origin: Mainland China
- Certification: none
- Supply: Rechargeable lithium battery
- Charging: Type-C 5V
- Real-time sample rate: 10MSa/s
- Analog Bandwidth: 500Khz
- Input resistance: 1MΩ
- Coupling method: AC/DC
- Test voltage range: 400V
- Vertical Sensitivity (x1): 10mV-10V
- Horizontal time base range: 1us-10s
- Trigger mode: Auto / Normal / Single
- Trigger type: Rising edge / Falling edge
- Waveform Freeze: YES
- Automatic measurement: YES
- Diodes: Forward voltage drop <4.5V
- Reglulated diode: 0.01~4.5V
- MOSFET: JFET IGBT MOSFET
- SCR: Turn-on voltage <5V, gate Pole trigger current <6mA
- Capacitor: 25pF~100mF
- Resistor: 0.01Ω~50MΩ
- Inductor: 10uH~1000mH
- Battery: 0.1~4.5V
- Input voltage: 0~40V
- DS18B20: 0-85℃
- DHT11: 0-60℃/5-95%
- Infrared remote decoding: NEC protocol infrared code
- Triangle wave: 1-10KHz/0-3.3V/50%, 1-10KHz/0-3.3V/50%
- Square wave: 1-100KHz/3.3V/50%
- Pulse wave: 1-100KHz/3.3V/0-100%
- Ramp: 1-10KHz/0-3.3V/0-100%
- DC: 0-3.3V
- Package Weight:
- Package Size:
Description
Conditions: Buyer shall pay all shipping cost for warranty services. Warranty does not cover physical damages.
Write a reviewCustomer Reviews
Have questions? Please submit a question here!Enquiries
Help: Please search FAQ for typical questions before asking here.